DCC Decoder LED Lighting Archives - Signaling, Lighting & Animation https://www.modeltraintechnology.com/product-tag/dcc-decoder-led-lighting/ Model Railroading Lighting, Animation, Detection, Signaling & Sound Thu, 13 Nov 2025 17:38:15 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.modeltraintechnology.com/wp-content/uploads/fav-icon-80x80.png DCC Decoder LED Lighting Archives - Signaling, Lighting & Animation https://www.modeltraintechnology.com/product-tag/dcc-decoder-led-lighting/ 32 32 180493065 LED Chips with Open Leads https://www.modeltraintechnology.com/product/led-chips-with-open-leads/ Mon, 30 Sep 2024 11:49:18 +0000 https://www.modeltraintechnology.com/?post_type=product&p=12085 The post LED Chips with Open Leads appeared first on Signaling, Lighting & Animation.

]]> The post LED Chips with Open Leads appeared first on Signaling, Lighting & Animation.

]]> 12085 One-2-Four Connector Block (TERMINAL) https://www.modeltraintechnology.com/product/one-2-four-connector-block-terminal/ https://www.modeltraintechnology.com/product/one-2-four-connector-block-terminal/#respond Sat, 13 Jul 2024 14:26:34 +0000 https://www.modeltraintechnology.com/?post_type=product&p=11781 Use the One-2-Four connector to join LEDs to a single Controller port. Or extend your reach of the LED’s out to the layout.

The post One-2-Four Connector Block (TERMINAL) appeared first on Signaling, Lighting & Animation.

]]> Use the One-2-Four connector to join LEDs to a single Controller port. Or extend your reach of the LED’s out to the layout.

The post One-2-Four Connector Block (TERMINAL) appeared first on Signaling, Lighting & Animation.

]]> https://www.modeltraintechnology.com/product/one-2-four-connector-block-terminal/feed/ 0 11781 One-2-Four Connector Block (TERM to JST) https://www.modeltraintechnology.com/product/one-2-four-connector-block-term-to-jst/ https://www.modeltraintechnology.com/product/one-2-four-connector-block-term-to-jst/#respond Sat, 13 Jul 2024 14:21:33 +0000 https://www.modeltraintechnology.com/?post_type=product&p=11775 Use the One-2-Four connector to join LEDs to a single Controller port. Or extend your reach of the LED’s out to the layout.  Use the JST-to-JST Connector Wire to connect the Block to the Controller.

The post One-2-Four Connector Block (TERM to JST) appeared first on Signaling, Lighting & Animation.

]]> Use the One-2-Four connector to join LEDs to a single Controller port. Or extend your reach of the LED’s out to the layout.  Use the JST-to-JST Connector Wire to connect the Block to the Controller.

The post One-2-Four Connector Block (TERM to JST) appeared first on Signaling, Lighting & Animation.

]]> https://www.modeltraintechnology.com/product/one-2-four-connector-block-term-to-jst/feed/ 0 11775 DC LED Lighting for Passenger Cars – N Scale https://www.modeltraintechnology.com/product/dc-led-lighting-for-passenger-cars-n-scale/ Sun, 23 Jun 2024 15:31:40 +0000 https://www.modeltraintechnology.com/?post_type=product&p=11653 DC LED Lighting for Passenger Cars – N Scale See our Announcement Video!   CLICK HERE Instructional Video:  CLICK HERE

The post DC LED Lighting for Passenger Cars – N Scale appeared first on Signaling, Lighting & Animation.

]]> DC LED Lighting for Passenger Cars – N Scale

See our Announcement Video!   CLICK HERE

Instructional Video:  CLICK HERE

The post DC LED Lighting for Passenger Cars – N Scale appeared first on Signaling, Lighting & Animation.

]]> 11653 LED MICRO 5 Lighting Controller Board (LED TEST BOARD) https://www.modeltraintechnology.com/product/led-micro-5-lighting-controller-board-led-test-board/ Sun, 09 Jun 2024 19:15:59 +0000 https://www.modeltraintechnology.com/?post_type=product&p=11574 This is the new LLC 5 MICRO Board.  This unit DOES NOT need DCC to run but it includes a DCC decoder circuit if needed. THIS BOARD IS ONLY FOR CONFIGURATION AND TESTING. Specifications: 1 Amp capacity 100ma per port, 16 ports LED on each port 5 million possible configurations Each port brightness can be […]

The post LED MICRO 5 Lighting Controller Board (LED TEST BOARD) appeared first on Signaling, Lighting & Animation.

]]> This is the new LLC 5 MICRO Board.  This unit DOES NOT need DCC to run but it includes a DCC decoder circuit if needed.

THIS BOARD IS ONLY FOR CONFIGURATION AND TESTING.

Specifications:

1 Amp capacity 100ma per port, 16 ports
LED on each port
5 million possible configurations
Each port brightness can be adjusted individually
Each port animation behavior is individually controllable
Programmable from the LLC 5 MAIN Unit via a USB cable
Programmable via DCC
Builtin DCC Decoder, switchable between Multifunction and Accessory mode.
All 16 channels can be remotely controller either via DCC Accessory mode OR via the MTT Sensor Hub

 

The post LED MICRO 5 Lighting Controller Board (LED TEST BOARD) appeared first on Signaling, Lighting & Animation.

]]> 11574 JST wire (36″) pre-wired with LED chips. (16 per pack) Chips Attached https://www.modeltraintechnology.com/product/jst-wire-36-pre-wired-with-16-led-chips-16-per-pack/ Tue, 21 Apr 2020 00:02:34 +0000 http://jims-online-workshop.com/?post_type=product&p=1344 This package contains 16 pre-wired LEDs chips SOLDER CONNECTED with JST plugs.  You can select the color of chip to combine with the 36″ connector wire with JST plug. 1 Package comes with 8 wires and 8 chips are already pre-wired.  Simply plug them into the LSC II and add power!

The post JST wire (36″) pre-wired with LED chips. (16 per pack) Chips Attached appeared first on Signaling, Lighting & Animation.

]]> This package contains 16 pre-wired LEDs chips SOLDER CONNECTED with JST plugs.  You can select the color of chip to combine with the 36″ connector wire with JST plug. 1 Package comes with 8 wires and 8 chips are already pre-wired.  Simply plug them into the LSC II and add power!

The post JST wire (36″) pre-wired with LED chips. (16 per pack) Chips Attached appeared first on Signaling, Lighting & Animation.

]]> 1344 One-2-Four Connector Block (JST to JST) https://www.modeltraintechnology.com/product/one-2-four-connector-block/ https://www.modeltraintechnology.com/product/one-2-four-connector-block/#respond Thu, 16 Apr 2020 09:23:02 +0000 http://jims-online-workshop.com/?post_type=product&p=1331 Use the One-2-Four connector to join LEDs to a single Controller port. Or extend your reach of the LED’s out to the layout.  Use the JST-to-JST Connector Wire to connect the Block to the Controller.

The post One-2-Four Connector Block (JST to JST) appeared first on Signaling, Lighting & Animation.

]]> Use the One-2-Four connector to join LEDs to a single Controller port. Or extend your reach of the LED’s out to the layout.  Use the JST-to-JST Connector Wire to connect the Block to the Controller.

The post One-2-Four Connector Block (JST to JST) appeared first on Signaling, Lighting & Animation.

]]> https://www.modeltraintechnology.com/product/one-2-four-connector-block/feed/ 0 1331 LED MICRO 5 Lighting Controller Board (Solder Pads) https://www.modeltraintechnology.com/product/led-micro-scene-controller-board-solder-pads/ Wed, 26 Feb 2020 05:29:15 +0000 http://jims-online-workshop.com/?post_type=product&p=501 This is the new LLC 5 MICRO Board.  This unit DOES NOT need DCC to run but it includes a DCC decoder circuit if needed. Specifications: 1 Amp capacity 100ma per port, 16 ports Solder pad connections 5 million possible configurations Each port brightness can be adjusted individually Each port animation behavior is individually controllable […]

The post LED MICRO 5 Lighting Controller Board (Solder Pads) appeared first on Signaling, Lighting & Animation.

]]> This is the new LLC 5 MICRO Board.  This unit DOES NOT need DCC to run but it includes a DCC decoder circuit if needed.

Specifications:

1 Amp capacity 100ma per port, 16 ports
Solder pad connections
5 million possible configurations
Each port brightness can be adjusted individually
Each port animation behavior is individually controllable
Programmable from the LLC 5 MAIN Unit via a USB cable
Programmable via DCC
Builtin DCC Decoder, switchable between Multifunction and Accessory mode.
All 16 channels can be remotely controller either via DCC Accessory mode OR via the MTT Sensor Hub

 

The post LED MICRO 5 Lighting Controller Board (Solder Pads) appeared first on Signaling, Lighting & Animation.

]]> 501