G Scale Motorized Crossing Gate

The G Scale Motorized Crossing Gate is simple to operate and looks like the real thing!  The Gate Controller ( and the signal/motor) runs on 12VDC  and needs only a Signal wire connection to a Precision Detector MAX to operate. You can use a Solar Battery, our Power Module or the 12VDC Power Supply (All available in our store)

The Crossing Gate unit is weather tolerant which means if it accidentally gets wet the unit will not be ruined. BUT – don’t leave the unit outside or cover it when not in use.

The Crossing Controller INSIDE version is NOT weather proof (or tolerant) and must be protected from weather.n The OUTSIDE Case and Block is weather tolerant but the GATE itself must be protected from the elements.

PRODUCTION TIME FROM ORDER IS  ~ 4 WEEKS . 

You can connect either the Bell Module or the Sound Module using the same signal wire for the detectors. Order Separately.

For East/West detection, add a second Precision Detector MAX and join the signal wires.

There are two options for mounting the crossing:  4 x 4 Rubber blocks or the newly introduced Thin Magnet Mounting.

Other ADD-ON OPTIONS:

1.  1 or 2 Gates $249.95 ea.
2. 2 Precision Detector MAX. $39.95 ea.
3. Bell Module  $39.95
4. Power Module Or Solar Battery  ~$50

Click this link for a short demo video:   Moving Gate Crossing

Click here for the full Youtube Channel Introduction and demonstration video

ADDITIONAL INFORMATION and DOCUMENTATION WILL BE AVAILABLE SHORTLY.

G Scale Motorized Gate Crossing Controller: